The Kenmore Progressive vacuum comes in two role model : the upright and the tin . Both vacuums use a pocketbook to pull in dirt . These Kenmore Progressive models come with a one - yr limited warranty , which does not wrap up general upkeep . Loud noises are often because of obstructions and debris in the vacuum , which are n’t cover by its warranty .
Upright Vacuum Central Unit
The upright Kenmore Progressive vacuum cleaner bag and filters are in the fundamental part of the vacuum , andthe brush roller and beltare in the base . Turn off the vacuum and unplug it from the electric outlet . Detach the front of the vacuum by pressing the release clitoris , then remove the casing of the central part of the vacuum . Remove the void dish . Remove the motor - safety filter located under the vacuum light bagful . If the filter is ill-gotten , supervene upon it with a new filter from an authorised Kenmore retailer . Remove the exhaust filter from the bottom front of the vacuum , under the field where the emptiness bag is that stored . Rinse the exhaust filter in warm water to clean house it .
Upright Vacuum Base
The nucleotide of the Kenmore Progressive unsloped vacuum contains the light touch roller and belt , and most likely this is where the loud haphazardness is coming from . rick the void over , with the brush roller facing up . Detach the latches on the basis collection plate to expose the brushing tumbler pigeon and belt . Cut away obstructions from the coppice roller , such as string or hair’s-breadth , using scissors . Check the base of the unit to ensure that no other obstruction are in the brushwood curler housing . Check the belted ammunition to ensure that it ’s connect to the motor calamus .
Canister Vacuum Attachments
The Kenmore Progressive canister vacuum ’s canister is attached to the hosiery and power wand . After turning off and unplugging the vacuum , turn the major power wand over to let out the base plate that covers the brush roll . The business leader unit cover detaches by pressing the latches on the side and removing it from the top . Check for junk and dust and remove it . arrest the whack to ensure that it ’s attached properly to the skirmish tumbler and agitator assembly . Reattach the covering and leaf it over . bump off the base plate from the simple machine using a screwdriver to detach the screws procure it . veer away obstructer from the clash roller , such as string or hair , using scissors . Check the base of the building block to insure that no other obstruction are in the coppice roller trapping .
Canister
The vacuum bag is in the canister of the Kenmore Progressive canister shot vacuum . Remove it from the vacuum . Check the motor and exhaust filter for dirt and debris . On the tin good example , supplant the filter with a novel one from an authorized Kenmore retail merchant . Use a teetotal , clean pigment brush to remove dust and junk from the canister . Replace the vacuum bag if it ’s full .
Reassembly and Maintenance
Reassemble the vacuum after the parts and filter are dry . Not only will the noise be reduced , but the vacuum will run more in effect , with good suction and cleansing capacity . do this type of sustentation routinely to reduce the noise of the emptiness .
